;******************** (C) Yifeng ZHU ******************************************* ; @file startup_stm32f407xx.s ; @author Yifeng Zhu ; @version V2.1.0 ; @date May-17-2015 ; @note ; @brief This is a modified startup code to support Assembly Programs without ; using libraries. Key changes include: ; (1) Remove the call of SystemInit() ; (2) Add codes to initialize memory. ; Copy the Read/Write data section (RW) and the Zero Initialized ; section (ZI) from the flash to RAM ; (3) Enable FPU ; @note ; This code is for the book "Embedded Systems with ARM Cortex-M3 ; Microcontrollers in Assembly Language and C, Yifeng Zhu, ; ISBN-10: 0982692625. ; @attension ; This code is provided for education purpose. The author shall not be ; held liable for any direct, indirect or consequential damages, for any ; reason whatever. More information can be found from book website: ; http://www.eece.maine.edu/~zhu/book ;******************************************************************************* ;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** ;* File Name : startup_stm32f407xx.s ;* Author : MCD Application Team ;* Version : V2.1.0 ;* Date : 19-June-2014 ;* Description : STM32F407xx devices vector table for MDK-ARM toolchain. ;* This module performs: ;* - Set the initial SP ;* - Set the initial PC == Reset_Handler ;* - Set the vector table entries with the exceptions ISR address ;* - Branches to __main in the C library (which eventually ;* calls main()). ;* After Reset the CortexM4 processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. ;* <<< Use Configuration Wizard in Context Menu >>> ;******************************************************************************* ; ;* Redistribution and use in source and binary forms, with or without modification, ;* are permitted provided that the following conditions are met: ;* 1. Redistributions of source code must retain the above copyright notice, ;* this list of conditions and the following disclaimer. ;* 2. Redistributions in binary form must reproduce the above copyright notice, ;* this list of conditions and the following disclaimer in the documentation ;* and/or other materials provided with the distribution. ;* 3. Neither the name of STMicroelectronics nor the names of its contributors ;* may be used to endorse or promote products derived from this software ;* without specific prior written permission. ;* ;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE ;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, ;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ; ;******************************************************************************* ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; Stack Configuration ; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> ; ;******************** Added by Dr. Zhu ***************************************************** ; ROM: Symbols defined by the linker IMPORT |Load$$ER_IROM1$$Base| ; Entry of Bootloader IMPORT |Image$$ER_IROM1$$RO$$Base| ; Start of RO output section IMPORT |Image$$ER_IROM1$$RO$$Limit| ; First byte beyond the end of RO output section IMPORT |Image$$ER_IROM1$$RO$$Length| ; Size of RO output section IMPORT |Image$$ER_IROM1$$RW$$Base| IMPORT |Image$$ER_IROM1$$RW$$Length| IMPORT |Image$$ER_IROM1$$RW$$Limit| IMPORT |Image$$ER_IROM1$$ZI$$Base| IMPORT |Image$$ER_IROM1$$ZI$$Length| IMPORT |Image$$ER_IROM1$$ZI$$Limit| ; RAM: Symbols defined by the linker IMPORT |Load$$RW_IRAM1$$Base| ; Load Address IMPORT |Image$$RW_IRAM1$$Base| ; Start of RW output section IMPORT |Image$$RW_IRAM1$$Length| IMPORT |Image$$RW_IRAM1$$Limit| IMPORT |Image$$RW_IRAM1$$RO$$Base| IMPORT |Image$$RW_IRAM1$$RO$$Base| IMPORT |Image$$RW_IRAM1$$RO$$Length| IMPORT |Image$$RW_IRAM1$$RW$$Base| ; Start of RW output section IMPORT |Image$$RW_IRAM1$$RW$$Limit| ; End of RW output section IMPORT |Image$$RW_IRAM1$$RW$$Length| ; Size of RW output section IMPORT |Image$$RW_IRAM1$$ZI$$Base| ; Start of ZI output section IMPORT |Image$$RW_IRAM1$$ZI$$Limit| ; End of ZI output section IMPORT |Image$$RW_IRAM1$$ZI$$Length| ; Size of ZI output section ;******************** END ************************************************************************ Stack_Size EQU 0x00000400 AREA STACK, NOINIT, READWRITE, ALIGN=3 Stack_Mem SPACE Stack_Size __initial_sp ; Heap Configuration ; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> ; Heap_Size EQU 0x00000200 AREA HEAP, NOINIT, READWRITE, ALIGN=3 __heap_base Heap_Mem SPACE Heap_Size __heap_limit PRESERVE8 THUMB ; Vector Table Mapped to Address 0 at Reset AREA RESET, DATA, READONLY EXPORT __Vectors EXPORT __Vectors_End EXPORT __Vectors_Size __Vectors DCD __initial_sp ; Top of Stack DCD Reset_Handler ; Reset Handler DCD NMI_Handler ; NMI Handler DCD HardFault_Handler ; Hard Fault Handler DCD MemManage_Handler ; MPU Fault Handler DCD BusFault_Handler ; Bus Fault Handler DCD UsageFault_Handler ; Usage Fault Handler DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD SVC_Handler ; SVCall Handler DCD DebugMon_Handler ; Debug Monitor Handler DCD 0 ; Reserved DCD PendSV_Handler ; PendSV Handler DCD SysTick_Handler ; SysTick Handler ; External Interrupts DCD WWDG_IRQHandler ; Window WatchDog DCD PVD_IRQHandler ; PVD through EXTI Line detection DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line DCD FLASH_IRQHandler ; FLASH DCD RCC_IRQHandler ; RCC DCD EXTI0_IRQHandler ; EXTI Line0 DCD EXTI1_IRQHandler ; EXTI Line1 DCD EXTI2_IRQHandler ; EXTI Line2 DCD EXTI3_IRQHandler ; EXTI Line3 DCD EXTI4_IRQHandler ; EXTI Line4 DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s DCD CAN1_TX_IRQHandler ; CAN1 TX DCD CAN1_RX0_IRQHandler ; CAN1 RX0 DCD CAN1_RX1_IRQHandler ; CAN1 RX1 DCD CAN1_SCE_IRQHandler ; CAN1 SCE DCD EXTI9_5_IRQHandler ; External Line[9:5]s DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare DCD TIM2_IRQHandler ; TIM2 DCD TIM3_IRQHandler ; TIM3 DCD TIM4_IRQHandler ; TIM4 DCD I2C1_EV_IRQHandler ; I2C1 Event DCD I2C1_ER_IRQHandler ; I2C1 Error DCD I2C2_EV_IRQHandler ; I2C2 Event DCD I2C2_ER_IRQHandler ; I2C2 Error DCD SPI1_IRQHandler ; SPI1 DCD SPI2_IRQHandler ; SPI2 DCD USART1_IRQHandler ; USART1 DCD USART2_IRQHandler ; USART2 DCD USART3_IRQHandler ; USART3 DCD EXTI15_10_IRQHandler ; External Line[15:10]s DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12 DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13 DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14 DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 DCD FMC_IRQHandler ; FMC DCD SDIO_IRQHandler ; SDIO DCD TIM5_IRQHandler ; TIM5 DCD SPI3_IRQHandler ; SPI3 DCD UART4_IRQHandler ; UART4 DCD UART5_IRQHandler ; UART5 DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors DCD TIM7_IRQHandler ; TIM7 DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 DCD ETH_IRQHandler ; Ethernet DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line DCD CAN2_TX_IRQHandler ; CAN2 TX DCD CAN2_RX0_IRQHandler ; CAN2 RX0 DCD CAN2_RX1_IRQHandler ; CAN2 RX1 DCD CAN2_SCE_IRQHandler ; CAN2 SCE DCD OTG_FS_IRQHandler ; USB OTG FS DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 DCD USART6_IRQHandler ; USART6 DCD I2C3_EV_IRQHandler ; I2C3 event DCD I2C3_ER_IRQHandler ; I2C3 error DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI DCD OTG_HS_IRQHandler ; USB OTG HS DCD DCMI_IRQHandler ; DCMI DCD 0 ; Reserved DCD HASH_RNG_IRQHandler ; Hash and Rng DCD FPU_IRQHandler ; FPU __Vectors_End __Vectors_Size EQU __Vectors_End - __Vectors AREA |.text|, CODE, READONLY, ALIGN=3 ; Reset handler Reset_Handler PROC EXPORT Reset_Handler [WEAK] ;IMPORT SystemInit ; Remove by Zhu IMPORT __main ;******************** Removed by Dr. Zhu *************************************************** ; IMPORT SystemInit ; LDR R0, =SystemInit ; Commented out by ZHU ; BLX R0 ; Commented out by ZHU ;******************** Added by Dr. Zhu ***************************************************** ; Copy the RW Data from Flash to RAM LDR r0, =|Image$$ER_IROM1$$RO$$Limit| LDR r1, =|Image$$RW_IRAM1$$RW$$Base| LDR r3, =|Image$$RW_IRAM1$$ZI$$Base| Copy_RW CMP r1, r3 LDRCC r2, [r0], #4 STRCC r2, [r1], #4 BCC Copy_RW ; Copy the ZI Data from Flash to RAM LDR r1, =|Image$$RW_IRAM1$$ZI$$Limit| MOV r2, #0 Initialize_ZI CMP r3, r1 STRCC r2, [r3], #4 BCC Initialize_ZI ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Enable FPU ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; CPACR is located at address 0xE000ED88 LDR.W R0, =0xE000ED88 ; Read CPACR LDR R1, [R0] ; Set bits 20-23 to enable CP10 and CP11 coprocessors ORR R1, R1, #(0xF << 20) ; Write back the modified value to the CPACR STR R1, [R0]; wait for store to complete DSB ;reset pipeline now the FPU is enabled ISB ;******************** END ******************************************************************** LDR R0, =__main BX R0 ENDP ; Dummy Exception Handlers (infinite loops which can be modified) NMI_Handler PROC EXPORT NMI_Handler [WEAK] B . ENDP HardFault_Handler\ PROC EXPORT HardFault_Handler [WEAK] B . ENDP MemManage_Handler\ PROC EXPORT MemManage_Handler [WEAK] B . ENDP BusFault_Handler\ PROC EXPORT BusFault_Handler [WEAK] B . ENDP UsageFault_Handler\ PROC EXPORT UsageFault_Handler [WEAK] B . ENDP SVC_Handler PROC EXPORT SVC_Handler [WEAK] B . ENDP DebugMon_Handler\ PROC EXPORT DebugMon_Handler [WEAK] B . ENDP PendSV_Handler PROC EXPORT PendSV_Handler [WEAK] B . ENDP SysTick_Handler PROC EXPORT SysTick_Handler [WEAK] B . ENDP Default_Handler PROC EXPORT WWDG_IRQHandler [WEAK] EXPORT PVD_IRQHandler [WEAK] EXPORT TAMP_STAMP_IRQHandler [WEAK] EXPORT RTC_WKUP_IRQHandler [WEAK] EXPORT FLASH_IRQHandler [WEAK] EXPORT RCC_IRQHandler [WEAK] EXPORT EXTI0_IRQHandler [WEAK] EXPORT EXTI1_IRQHandler [WEAK] EXPORT EXTI2_IRQHandler [WEAK] EXPORT EXTI3_IRQHandler [WEAK] EXPORT EXTI4_IRQHandler [WEAK] EXPORT DMA1_Stream0_IRQHandler [WEAK] EXPORT DMA1_Stream1_IRQHandler [WEAK] EXPORT DMA1_Stream2_IRQHandler [WEAK] EXPORT DMA1_Stream3_IRQHandler [WEAK] EXPORT DMA1_Stream4_IRQHandler [WEAK] EXPORT DMA1_Stream5_IRQHandler [WEAK] EXPORT DMA1_Stream6_IRQHandler [WEAK] EXPORT ADC_IRQHandler [WEAK] EXPORT CAN1_TX_IRQHandler [WEAK] EXPORT CAN1_RX0_IRQHandler [WEAK] EXPORT CAN1_RX1_IRQHandler [WEAK] EXPORT CAN1_SCE_IRQHandler [WEAK] EXPORT EXTI9_5_IRQHandler [WEAK] EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK] EXPORT TIM1_UP_TIM10_IRQHandler [WEAK] EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK] EXPORT TIM1_CC_IRQHandler [WEAK] EXPORT TIM2_IRQHandler [WEAK] EXPORT TIM3_IRQHandler [WEAK] EXPORT TIM4_IRQHandler [WEAK] EXPORT I2C1_EV_IRQHandler [WEAK] EXPORT I2C1_ER_IRQHandler [WEAK] EXPORT I2C2_EV_IRQHandler [WEAK] EXPORT I2C2_ER_IRQHandler [WEAK] EXPORT SPI1_IRQHandler [WEAK] EXPORT SPI2_IRQHandler [WEAK] EXPORT USART1_IRQHandler [WEAK] EXPORT USART2_IRQHandler [WEAK] EXPORT USART3_IRQHandler [WEAK] EXPORT EXTI15_10_IRQHandler [WEAK] EXPORT RTC_Alarm_IRQHandler [WEAK] EXPORT OTG_FS_WKUP_IRQHandler [WEAK] EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK] EXPORT TIM8_UP_TIM13_IRQHandler [WEAK] EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK] EXPORT TIM8_CC_IRQHandler [WEAK] EXPORT DMA1_Stream7_IRQHandler [WEAK] EXPORT FMC_IRQHandler [WEAK] EXPORT SDIO_IRQHandler [WEAK] EXPORT TIM5_IRQHandler [WEAK] EXPORT SPI3_IRQHandler [WEAK] EXPORT UART4_IRQHandler [WEAK] EXPORT UART5_IRQHandler [WEAK] EXPORT TIM6_DAC_IRQHandler [WEAK] EXPORT TIM7_IRQHandler [WEAK] EXPORT DMA2_Stream0_IRQHandler [WEAK] EXPORT DMA2_Stream1_IRQHandler [WEAK] EXPORT DMA2_Stream2_IRQHandler [WEAK] EXPORT DMA2_Stream3_IRQHandler [WEAK] EXPORT DMA2_Stream4_IRQHandler [WEAK] EXPORT ETH_IRQHandler [WEAK] EXPORT ETH_WKUP_IRQHandler [WEAK] EXPORT CAN2_TX_IRQHandler [WEAK] EXPORT CAN2_RX0_IRQHandler [WEAK] EXPORT CAN2_RX1_IRQHandler [WEAK] EXPORT CAN2_SCE_IRQHandler [WEAK] EXPORT OTG_FS_IRQHandler [WEAK] EXPORT DMA2_Stream5_IRQHandler [WEAK] EXPORT DMA2_Stream6_IRQHandler [WEAK] EXPORT DMA2_Stream7_IRQHandler [WEAK] EXPORT USART6_IRQHandler [WEAK] EXPORT I2C3_EV_IRQHandler [WEAK] EXPORT I2C3_ER_IRQHandler [WEAK] EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK] EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK] EXPORT OTG_HS_WKUP_IRQHandler [WEAK] EXPORT OTG_HS_IRQHandler [WEAK] EXPORT DCMI_IRQHandler [WEAK] EXPORT HASH_RNG_IRQHandler [WEAK] EXPORT FPU_IRQHandler [WEAK] WWDG_IRQHandler PVD_IRQHandler TAMP_STAMP_IRQHandler RTC_WKUP_IRQHandler FLASH_IRQHandler RCC_IRQHandler EXTI0_IRQHandler EXTI1_IRQHandler EXTI2_IRQHandler EXTI3_IRQHandler EXTI4_IRQHandler DMA1_Stream0_IRQHandler DMA1_Stream1_IRQHandler DMA1_Stream2_IRQHandler DMA1_Stream3_IRQHandler DMA1_Stream4_IRQHandler DMA1_Stream5_IRQHandler DMA1_Stream6_IRQHandler ADC_IRQHandler CAN1_TX_IRQHandler CAN1_RX0_IRQHandler CAN1_RX1_IRQHandler CAN1_SCE_IRQHandler EXTI9_5_IRQHandler TIM1_BRK_TIM9_IRQHandler TIM1_UP_TIM10_IRQHandler TIM1_TRG_COM_TIM11_IRQHandler TIM1_CC_IRQHandler TIM2_IRQHandler TIM3_IRQHandler TIM4_IRQHandler I2C1_EV_IRQHandler I2C1_ER_IRQHandler I2C2_EV_IRQHandler I2C2_ER_IRQHandler SPI1_IRQHandler SPI2_IRQHandler USART1_IRQHandler USART2_IRQHandler USART3_IRQHandler EXTI15_10_IRQHandler RTC_Alarm_IRQHandler OTG_FS_WKUP_IRQHandler TIM8_BRK_TIM12_IRQHandler TIM8_UP_TIM13_IRQHandler TIM8_TRG_COM_TIM14_IRQHandler TIM8_CC_IRQHandler DMA1_Stream7_IRQHandler FMC_IRQHandler SDIO_IRQHandler TIM5_IRQHandler SPI3_IRQHandler UART4_IRQHandler UART5_IRQHandler TIM6_DAC_IRQHandler TIM7_IRQHandler DMA2_Stream0_IRQHandler DMA2_Stream1_IRQHandler DMA2_Stream2_IRQHandler DMA2_Stream3_IRQHandler DMA2_Stream4_IRQHandler ETH_IRQHandler ETH_WKUP_IRQHandler CAN2_TX_IRQHandler CAN2_RX0_IRQHandler CAN2_RX1_IRQHandler CAN2_SCE_IRQHandler OTG_FS_IRQHandler DMA2_Stream5_IRQHandler DMA2_Stream6_IRQHandler DMA2_Stream7_IRQHandler USART6_IRQHandler I2C3_EV_IRQHandler I2C3_ER_IRQHandler OTG_HS_EP1_OUT_IRQHandler OTG_HS_EP1_IN_IRQHandler OTG_HS_WKUP_IRQHandler OTG_HS_IRQHandler DCMI_IRQHandler HASH_RNG_IRQHandler FPU_IRQHandler B . ENDP ALIGN ;******************************************************************************* ; User Stack and Heap initialization ;******************************************************************************* IF :DEF:__MICROLIB EXPORT __initial_sp EXPORT __heap_base EXPORT __heap_limit ELSE ;IMPORT __use_two_region_memory ; Remove by Zhu EXPORT __user_initial_stackheap __user_initial_stackheap LDR R0, = Heap_Mem LDR R1, =(Stack_Mem + Stack_Size) LDR R2, = (Heap_Mem + Heap_Size) LDR R3, = Stack_Mem BX LR ALIGN ENDIF END ;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****