![]() |
CMSIS-Core (Cortex-A)
Version 1.1.4
CMSIS-Core support for Cortex-A processor-based devices
|
/**************************************************************************//** * @file mem_<Device>.h * @brief CMSIS Cortex-A Memory base and size definitions (used in scatter file) * @version V1.00 * @date 10. January 2018 ******************************************************************************/ /* * Copyright (c) 2009-2018 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the License); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MEM_<Device>_H /* ToDo: replace '<Device>' with your device name */ #define MEM_<Device>_H /*---------------------------------------------------------------------------- User Stack & Heap size definition *----------------------------------------------------------------------------*/ /* //-------- <<< Use Configuration Wizard in Context Menu >>> ------------------ */ /*--------------------- ROM Configuration ------------------------------------ // // <h> ROM Configuration // <o0> ROM Base Address <0x0-0xFFFFFFFF:8> // <o1> ROM Size (in Bytes) <0x0-0xFFFFFFFF:8> // </h> *----------------------------------------------------------------------------*/ #define __ROM_BASE 0x80000000 #define __ROM_SIZE 0x00200000 /*--------------------- RAM Configuration ----------------------------------- // <h> RAM Configuration // <o0> RAM Base Address <0x0-0xFFFFFFFF:8> // <o1> RAM Total Size (in Bytes) <0x0-0xFFFFFFFF:8> // <o2> RW_DATA Size (in Bytes) <0x0-0xFFFFFFFF:8> // <o3> ZI_DATA Size (in Bytes) <0x0-0xFFFFFFFF:8> // <h> Stack / Heap Configuration // <o4> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> // <o5> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> // <h> Exceptional Modes // <o6> UND Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> // <o7> ABT Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> // <o8> SVC Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> // <o9> IRQ Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> // <o10> FIQ Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> // </h> // </h> // </h> *----------------------------------------------------------------------------*/ #define __RAM_BASE 0x80200000 #define __RAM_SIZE 0x00200000 #define __RW_DATA_SIZE 0x00100000 #define __ZI_DATA_SIZE 0x000F0000 #define __STACK_SIZE 0x00001000 #define __HEAP_SIZE 0x00008000 #define __UND_STACK_SIZE 0x00000100 #define __ABT_STACK_SIZE 0x00000100 #define __SVC_STACK_SIZE 0x00000100 #define __IRQ_STACK_SIZE 0x00000100 #define __FIQ_STACK_SIZE 0x00000100 /*----------------------------------------------------------------------------*/ /*--------------------- TTB Configuration ------------------------------------ // // <h> TTB Configuration // <o0> TTB Base Address <0x0-0xFFFFFFFF:8> // <o1> TTB Size (in Bytes) <0x0-0xFFFFFFFF:8> // </h> *----------------------------------------------------------------------------*/ #define __TTB_BASE 0x80500000 #define __TTB_SIZE 0x00004000 #endif /* MEM_<Device>_H */