![]() |
CMSIS-Core (Cortex-A)
Version 1.1.4
CMSIS-Core support for Cortex-A processor-based devices
|
/**************************************************************************//** * @file system_Device.c * @brief MMU Configuration * Device <DeviceAbbreviation> * @version V1.1.0 * @date 23. November 2018 ******************************************************************************/ /* * Copyright (c) 2009-2018 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the License); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /* Memory map description ToDo: add in this file your device memory map description following is an example of a Cortex-A9 Arm FVP device Memory Type 0xFFFFFFFF |--------------------------| ------------ | FLAG SYNC | Device Memory 0xFFFFF000 |--------------------------| ------------ | Fault | Fault 0xFFF00000 |--------------------------| ------------ | | Normal | | | Daughterboard | | memory | | | 0x80505000 |--------------------------| ------------ |TTB (L2 Sync Flags ) 4k | Normal 0x80504C00 |--------------------------| ------------ |TTB (L2 Peripherals-B) 16k| Normal 0x80504800 |--------------------------| ------------ |TTB (L2 Peripherals-A) 16k| Normal 0x80504400 |--------------------------| ------------ |TTB (L2 Priv Periphs) 4k | Normal 0x80504000 |--------------------------| ------------ | TTB (L1 Descriptors) | Normal 0x80500000 |--------------------------| ------------ | Heap | Normal |--------------------------| ------------ | Stack | Normal 0x80400000 |--------------------------| ------------ | ZI Data | Normal 0x80300000 |--------------------------| ------------ | RW Data | Normal 0x80200000 |--------------------------| ------------ | RO Data | Normal |--------------------------| ------------ | RO Code | USH Normal 0x80000000 |--------------------------| ------------ | Daughterboard | Fault | HSB AXI buses | 0x40000000 |--------------------------| ------------ | Daughterboard | Fault | test chips peripherals | 0x2C002000 |--------------------------| ------------ | Private Address | Device Memory 0x2C000000 |--------------------------| ------------ | Daughterboard | Fault | test chips peripherals | 0x20000000 |--------------------------| ------------ | Peripherals | Device Memory RW/RO | | & Fault 0x00000000 |--------------------------| */ // L1 Cache info and restrictions about architecture of the caches (CCSIR register): // Write-Through support *not* available // Write-Back support available. // Read allocation support available. // Write allocation support available. // Note: You should use the Shareable attribute carefully. // For cores without coherency logic (such as SCU) marking a region as shareable forces the processor to not cache that region regardless of the inner cache settings. // Cortex-A versions of RTX use LDREX/STREX instructions relying on Local monitors. Local monitors will be used only when the region gets cached, regions that are not cached will use the Global Monitor. // Some Cortex-A implementations do not include Global Monitors, so wrongly setting the attribute Shareable may cause STREX to fail. // Recall: When the Shareable attribute is applied to a memory region that is not Write-Back, Normal memory, data held in this region is treated as Non-cacheable. // When SMP bit = 0, Inner WB/WA Cacheable Shareable attributes are treated as Non-cacheable. // When SMP bit = 1, Inner WB/WA Cacheable Shareable attributes are treated as Cacheable. // Following MMU configuration is expected // SCTLR.AFE == 1 (Simplified access permissions model - AP[2:1] define access permissions, AP[0] is an access flag) // SCTLR.TRE == 0 (TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor) // Domain 0 is always the Client domain // Descriptors should place all memory in domain 0 #include "<Device>.h" /* ToDo: replace '<Device>' with your device name */ // L2 table pointers //----------------------------------------------------- #define PRIVATE_TABLE_L2_BASE_4k (0x80504000) //Map 4k Private Address space #define SYNC_FLAGS_TABLE_L2_BASE_4k (0x80504C00) //Map 4k Flag synchronization #define PERIPHERAL_A_TABLE_L2_BASE_64k (0x80504400) //Map 64k Peripheral #1 #define PERIPHERAL_B_TABLE_L2_BASE_64k (0x80504800) //Map 64k Peripheral #2 //--------------------- PERIPHERALS ------------------- #define PERIPHERAL_A_FAULT (0x00000000 + 0x1C000000) #define PERIPHERAL_B_FAULT (0x00100000 + 0x1C000000) //--------------------- SYNC FLAGS -------------------- #define FLAG_SYNC 0xFFFFF000 #define F_SYNC_BASE 0xFFF00000 //1M aligned //Import symbols from linker extern uint32_t Image$$VECTORS$$Base; extern uint32_t Image$$RW_DATA$$Base; extern uint32_t Image$$ZI_DATA$$Base; extern uint32_t Image$$TTB$$ZI$$Base; static uint32_t Sect_Normal; // outer & inner wb/wa, non-shareable, executable, rw, domain 0, base addr 0 static uint32_t Sect_Normal_Cod; // outer & inner wb/wa, non-shareable, executable, ro, domain 0, base addr 0 static uint32_t Sect_Normal_RO; // as Sect_Normal_Cod, but not executable static uint32_t Sect_Normal_RW; // as Sect_Normal_Cod, but writeable and not executable static uint32_t Sect_Device_RO; // device, non-shareable, non-executable, ro, domain 0, base addr 0 static uint32_t Sect_Device_RW; // as Sect_Device_RO, but writeable /* Define global descriptors */ static uint32_t Page_L1_4k = 0x0; // generic static uint32_t Page_L1_64k = 0x0; // generic static uint32_t Page_4k_Device_RW; // shared device, not executable, rw, domain 0 static uint32_t Page_64k_Device_RW; // shared device, not executable, rw, domain 0 void MMU_CreateTranslationTable(void) { mmu_region_attributes_Type region; // Create 4GB of faulting entries MMU_TTSection (&Image$$TTB$$ZI$$Base, 0, 4096, DESCRIPTOR_FAULT); /* * Generate descriptors. Refer to core_ca.h to get information about attributes * */ // Create descriptors for Vectors, RO, RW, ZI sections section_normal(Sect_Normal, region); section_normal_cod(Sect_Normal_Cod, region); section_normal_ro(Sect_Normal_RO, region); section_normal_rw(Sect_Normal_RW, region); // Create descriptors for peripherals section_Device_ro(Sect_Device_RO, region); section_Device_rw(Sect_Device_RW, region); // Create descriptors for 64k pages page64k_Device_rw(Page_L1_64k, Page_64k_Device_RW, region); // Create descriptors for 4k pages page4k_Device_rw(Page_L1_4k, Page_4k_Device_RW, region); /* * Define MMU flat-map regions and attributes * */ // Define Image MMU_TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)&Image$$VECTORS$$Base , 1U, Sect_Normal_Cod); MMU_TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)&Image$$RW_DATA$$Base , 1U, Sect_Normal_RW); MMU_TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)&Image$$ZI_DATA$$Base , 1U, Sect_Normal_RW); // All DRAM executable, RW, cacheable - applications may choose to divide memory into RO executable MMU_TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)&Image$$TTB$$ZI$$Base , 2043U, Sect_Normal); //--------------------- PERIPHERALS ------------------- MMU_TTSection (&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_FLASH_BASE0 , 64U, Sect_Device_RO); MMU_TTSection (&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_FLASH_BASE1 , 64U, Sect_Device_RO); MMU_TTSection (&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_SRAM_BASE , 64U, Sect_Device_RW); MMU_TTSection (&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_VRAM_BASE , 32U, Sect_Device_RW); MMU_TTSection (&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_ETHERNET_BASE , 16U, Sect_Device_RW); MMU_TTSection (&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_USB_BASE , 16U, Sect_Device_RW); // Create (16 * 64k)=1MB faulting entries to cover peripheral range MMU_TTPage64k(&Image$$TTB$$ZI$$Base, PERIPHERAL_A_FAULT , 16U, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, DESCRIPTOR_FAULT); // Define peripheral range MMU_TTPage64k(&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_DAP_BASE , 1U, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW); MMU_TTPage64k(&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_SYSTEM_REG_BASE , 1U, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW); MMU_TTPage64k(&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_SERIAL_BASE , 1U, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW); MMU_TTPage64k(&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_AACI_BASE , 1U, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW); MMU_TTPage64k(&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_MMCI_BASE , 1U, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW); MMU_TTPage64k(&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_KMI0_BASE , 2U, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW); MMU_TTPage64k(&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_UART_BASE , 4U, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW); MMU_TTPage64k(&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_WDT_BASE , 1U, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW); // Create (16 * 64k)=1MB faulting entries to cover peripheral range MMU_TTPage64k(&Image$$TTB$$ZI$$Base, PERIPHERAL_B_FAULT , 16U, Page_L1_64k, (uint32_t *)PERIPHERAL_B_TABLE_L2_BASE_64k, DESCRIPTOR_FAULT); // Define peripheral range MMU_TTPage64k(&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_TIMER_BASE , 2U, Page_L1_64k, (uint32_t *)PERIPHERAL_B_TABLE_L2_BASE_64k, Page_64k_Device_RW); MMU_TTPage64k(&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_DVI_BASE , 1U, Page_L1_64k, (uint32_t *)PERIPHERAL_B_TABLE_L2_BASE_64k, Page_64k_Device_RW); MMU_TTPage64k(&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_RTC_BASE , 1U, Page_L1_64k, (uint32_t *)PERIPHERAL_B_TABLE_L2_BASE_64k, Page_64k_Device_RW); MMU_TTPage64k(&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_UART4_BASE , 1U, Page_L1_64k, (uint32_t *)PERIPHERAL_B_TABLE_L2_BASE_64k, Page_64k_Device_RW); MMU_TTPage64k(&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_CLCD_BASE , 1U, Page_L1_64k, (uint32_t *)PERIPHERAL_B_TABLE_L2_BASE_64k, Page_64k_Device_RW); // Create (256 * 4k)=1MB faulting entries to cover private address space. Needs to be marked as Device memory MMU_TTPage4k (&Image$$TTB$$ZI$$Base, __get_CBAR() , 256U, Page_L1_4k, (uint32_t *)PRIVATE_TABLE_L2_BASE_4k, DESCRIPTOR_FAULT); // Define private address space entry MMU_TTPage4k (&Image$$TTB$$ZI$$Base, __get_CBAR() , 2U, Page_L1_4k, (uint32_t *)PRIVATE_TABLE_L2_BASE_4k, Page_4k_Device_RW); // Define L2CC entry MMU_TTPage4k (&Image$$TTB$$ZI$$Base, <DeviceAbbreviation>_L2C_BASE , 1U, Page_L1_4k, (uint32_t *)PRIVATE_TABLE_L2_BASE_4k, Page_4k_Device_RW); // Create (256 * 4k)=1MB faulting entries to synchronization space (Useful if some non-cacheable DMA agent is present in the SoC) MMU_TTPage4k (&Image$$TTB$$ZI$$Base, F_SYNC_BASE , 256U, Page_L1_4k, (uint32_t *)SYNC_FLAGS_TABLE_L2_BASE_4k, DESCRIPTOR_FAULT); // Define synchronization space entry. MMU_TTPage4k (&Image$$TTB$$ZI$$Base, FLAG_SYNC , 1U, Page_L1_4k, (uint32_t *)SYNC_FLAGS_TABLE_L2_BASE_4k, Page_4k_Device_RW); /* Set location of level 1 page table ; 31:14 - Translation table base addr (31:14-TTBCR.N, TTBCR.N is 0 out of reset) ; 13:7 - 0x0 ; 6 - IRGN[0] 0x1 (Inner WB WA) ; 5 - NOS 0x0 (Non-shared) ; 4:3 - RGN 0x01 (Outer WB WA) ; 2 - IMP 0x0 (Implementation Defined) ; 1 - S 0x0 (Non-shared) ; 0 - IRGN[1] 0x0 (Inner WB WA) */ __set_TTBR0(((uint32_t)&Image$$TTB$$ZI$$Base) | 0x48); __ISB(); /* Set up domain access control register ; We set domain 0 to Client and all other domains to No Access. ; All translation table entries specify domain 0 */ __set_DACR(1); __ISB(); }