DAP_SWO_Transport

Set SWO transport mode. More...

Set SWO transport mode.

DAP_SWO_Transport (0x17):

Sets the SWO transport mode for reading trace data.

DAP_SWO_Transport Request:

| BYTE | BYTE      |
> 0x17 | Transport |
|******|***********|

• Transport:
  • 0 - None (default)
  • 1 - Read trace data via DAP_SWO_Data command
  • 2 - Send trace data via separate WinUSB endpoint (requires CMSIS-DAP v2 configuration)
  • ... - reserved

DAP_SWO_Transport Response:

| BYTE | BYTE   |
< 0x17 | Status |
|******|********|

• Status: Response Status

Note

Currently the trace data can only be read via the existing DAP command request/response channel by using DAP_SWO_Data. Future extension might provide separate channels for reading trace data.