CMSIS-DSP  Version 1.7.0
CMSIS DSP Software Library
 All Data Structures Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages

Functions

void arm_correlate_f32 (const float32_t *pSrcA, uint32_t srcALen, const float32_t *pSrcB, uint32_t srcBLen, float32_t *pDst)
 Correlation of floating-point sequences. More...
 
void arm_correlate_fast_opt_q15 (const q15_t *pSrcA, uint32_t srcALen, const q15_t *pSrcB, uint32_t srcBLen, q15_t *pDst, q15_t *pScratch)
 Correlation of Q15 sequences (fast version). More...
 
void arm_correlate_fast_q15 (const q15_t *pSrcA, uint32_t srcALen, const q15_t *pSrcB, uint32_t srcBLen, q15_t *pDst)
 Correlation of Q15 sequences (fast version). More...
 
void arm_correlate_fast_q31 (const q31_t *pSrcA, uint32_t srcALen, const q31_t *pSrcB, uint32_t srcBLen, q31_t *pDst)
 Correlation of Q31 sequences (fast version). More...
 
void arm_correlate_opt_q15 (const q15_t *pSrcA, uint32_t srcALen, const q15_t *pSrcB, uint32_t srcBLen, q15_t *pDst, q15_t *pScratch)
 Correlation of Q15 sequences. More...
 
void arm_correlate_opt_q7 (const q7_t *pSrcA, uint32_t srcALen, const q7_t *pSrcB, uint32_t srcBLen, q7_t *pDst, q15_t *pScratch1, q15_t *pScratch2)
 Correlation of Q7 sequences. More...
 
void arm_correlate_q15 (const q15_t *pSrcA, uint32_t srcALen, const q15_t *pSrcB, uint32_t srcBLen, q15_t *pDst)
 Correlation of Q15 sequences. More...
 
void arm_correlate_q31 (const q31_t *pSrcA, uint32_t srcALen, const q31_t *pSrcB, uint32_t srcBLen, q31_t *pDst)
 Correlation of Q31 sequences. More...
 
void arm_correlate_q7 (const q7_t *pSrcA, uint32_t srcALen, const q7_t *pSrcB, uint32_t srcBLen, q7_t *pDst)
 Correlation of Q7 sequences. More...
 

Description

Correlation is a mathematical operation that is similar to convolution. As with convolution, correlation uses two signals to produce a third signal. The underlying algorithms in correlation and convolution are identical except that one of the inputs is flipped in convolution. Correlation is commonly used to measure the similarity between two signals. It has applications in pattern recognition, cryptanalysis, and searching. The CMSIS library provides correlation functions for Q7, Q15, Q31 and floating-point data types. Fast versions of the Q15 and Q31 functions are also provided.

Algorithm
Let a[n] and b[n] be sequences of length srcALen and srcBLen samples respectively. The convolution of the two signals is denoted by
    c[n] = a[n] * b[n]
In correlation, one of the signals is flipped in time
     c[n] = a[n] * b[-n]
and this is mathematically defined as
CorrelateEquation.gif
The pSrcA points to the first input vector of length srcALen and pSrcB points to the second input vector of length srcBLen. The result c[n] is of length 2 * max(srcALen, srcBLen) - 1 and is defined over the interval n=0, 1, 2, ..., (2 * max(srcALen, srcBLen) - 2). The output result is written to pDst and the calling function must allocate 2 * max(srcALen, srcBLen) - 1 words for the result.
Note
The pDst should be initialized to all zeros before being used.
Fixed-Point Behavior
Correlation requires summing up a large number of intermediate products. As such, the Q7, Q15, and Q31 functions run a risk of overflow and saturation. Refer to the function specific documentation below for further details of the particular algorithm used.
Fast Versions
Fast versions are supported for Q31 and Q15. Cycles for Fast versions are less compared to Q31 and Q15 of correlate and the design requires the input signals should be scaled down to avoid intermediate overflows.
Opt Versions
Opt versions are supported for Q15 and Q7. Design uses internal scratch buffer for getting good optimisation. These versions are optimised in cycles and consumes more memory (Scratch memory) compared to Q15 and Q7 versions of correlate

Function Documentation

void arm_correlate_f32 ( const float32_t pSrcA,
uint32_t  srcALen,
const float32_t pSrcB,
uint32_t  srcBLen,
float32_t pDst 
)
Parameters
[in]pSrcApoints to the first input sequence
[in]srcALenlength of the first input sequence
[in]pSrcBpoints to the second input sequence
[in]srcBLenlength of the second input sequence
[out]pDstpoints to the location where the output result is written. Length 2 * max(srcALen, srcBLen) - 1.
Returns
none
void arm_correlate_fast_opt_q15 ( const q15_t pSrcA,
uint32_t  srcALen,
const q15_t pSrcB,
uint32_t  srcBLen,
q15_t pDst,
q15_t pScratch 
)
Parameters
[in]pSrcApoints to the first input sequence
[in]srcALenlength of the first input sequence
[in]pSrcBpoints to the second input sequence
[in]srcBLenlength of the second input sequence.
[out]pDstpoints to the location where the output result is written. Length 2 * max(srcALen, srcBLen) - 1.
[in]pScratchpoints to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
Returns
none
Scaling and Overflow Behavior
This fast version uses a 32-bit accumulator with 2.30 format. The accumulator maintains full precision of the intermediate multiplication results but provides only a single guard bit. There is no saturation on intermediate additions. Thus, if the accumulator overflows it wraps around and distorts the result. The input signals should be scaled down to avoid intermediate overflows. Scale down one of the inputs by 1/min(srcALen, srcBLen) to avoid overflow since a maximum of min(srcALen, srcBLen) number of additions is carried internally. The 2.30 accumulator is right shifted by 15 bits and then saturated to 1.15 format to yield the final result.
Remarks
Refer to arm_correlate_q15() for a slower implementation of this function which uses a 64-bit accumulator to avoid wrap around distortion.
void arm_correlate_fast_q15 ( const q15_t pSrcA,
uint32_t  srcALen,
const q15_t pSrcB,
uint32_t  srcBLen,
q15_t pDst 
)
Parameters
[in]pSrcApoints to the first input sequence
[in]srcALenlength of the first input sequence
[in]pSrcBpoints to the second input sequence
[in]srcBLenlength of the second input sequence
[out]pDstpoints to the location where the output result is written. Length 2 * max(srcALen, srcBLen) - 1.
Returns
none
Scaling and Overflow Behavior
This fast version uses a 32-bit accumulator with 2.30 format. The accumulator maintains full precision of the intermediate multiplication results but provides only a single guard bit. There is no saturation on intermediate additions. Thus, if the accumulator overflows it wraps around and distorts the result. The input signals should be scaled down to avoid intermediate overflows. Scale down one of the inputs by 1/min(srcALen, srcBLen) to avoid overflow since a maximum of min(srcALen, srcBLen) number of additions is carried internally. The 2.30 accumulator is right shifted by 15 bits and then saturated to 1.15 format to yield the final result.
Remarks
Refer to arm_correlate_q15() for a slower implementation of this function which uses a 64-bit accumulator to avoid wrap around distortion.
void arm_correlate_fast_q31 ( const q31_t pSrcA,
uint32_t  srcALen,
const q31_t pSrcB,
uint32_t  srcBLen,
q31_t pDst 
)
Parameters
[in]pSrcApoints to the first input sequence
[in]srcALenlength of the first input sequence
[in]pSrcBpoints to the second input sequence
[in]srcBLenlength of the second input sequence
[out]pDstpoints to the location where the output result is written. Length 2 * max(srcALen, srcBLen) - 1.
Returns
none
Scaling and Overflow Behavior
This function is optimized for speed at the expense of fixed-point precision and overflow protection. The result of each 1.31 x 1.31 multiplication is truncated to 2.30 format. These intermediate results are accumulated in a 32-bit register in 2.30 format. Finally, the accumulator is saturated and converted to a 1.31 result.
The fast version has the same overflow behavior as the standard version but provides less precision since it discards the low 32 bits of each multiplication result. In order to avoid overflows completely the input signals must be scaled down. The input signals should be scaled down to avoid intermediate overflows. Scale down one of the inputs by 1/min(srcALen, srcBLen)to avoid overflows since a maximum of min(srcALen, srcBLen) number of additions is carried internally.
Remarks
Refer to arm_correlate_q31() for a slower implementation of this function which uses 64-bit accumulation to provide higher precision.
void arm_correlate_opt_q15 ( const q15_t pSrcA,
uint32_t  srcALen,
const q15_t pSrcB,
uint32_t  srcBLen,
q15_t pDst,
q15_t pScratch 
)
Parameters
[in]pSrcApoints to the first input sequence
[in]srcALenlength of the first input sequence
[in]pSrcBpoints to the second input sequence
[in]srcBLenlength of the second input sequence
[out]pDstpoints to the location where the output result is written. Length 2 * max(srcALen, srcBLen) - 1.
[in]pScratchpoints to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
Returns
none
Scaling and Overflow Behavior
The function is implemented using a 64-bit internal accumulator. Both inputs are in 1.15 format and multiplications yield a 2.30 result. The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format. This approach provides 33 guard bits and there is no risk of overflow. The 34.30 result is then truncated to 34.15 format by discarding the low 15 bits and then saturated to 1.15 format.
Remarks
Refer to arm_correlate_fast_q15() for a faster but less precise version of this function.
void arm_correlate_opt_q7 ( const q7_t pSrcA,
uint32_t  srcALen,
const q7_t pSrcB,
uint32_t  srcBLen,
q7_t pDst,
q15_t pScratch1,
q15_t pScratch2 
)
Parameters
[in]pSrcApoints to the first input sequence
[in]srcALenlength of the first input sequence
[in]pSrcBpoints to the second input sequence
[in]srcBLenlength of the second input sequence
[out]pDstpoints to the location where the output result is written. Length 2 * max(srcALen, srcBLen) - 1.
[in]pScratch1points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
[in]pScratch2points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
Returns
none
Scaling and Overflow Behavior
The function is implemented using a 32-bit internal accumulator. Both the inputs are represented in 1.7 format and multiplications yield a 2.14 result. The 2.14 intermediate results are accumulated in a 32-bit accumulator in 18.14 format. This approach provides 17 guard bits and there is no risk of overflow as long as max(srcALen, srcBLen)<131072. The 18.14 result is then truncated to 18.7 format by discarding the low 7 bits and then saturated to 1.7 format.
void arm_correlate_q15 ( const q15_t pSrcA,
uint32_t  srcALen,
const q15_t pSrcB,
uint32_t  srcBLen,
q15_t pDst 
)
Parameters
[in]pSrcApoints to the first input sequence
[in]srcALenlength of the first input sequence
[in]pSrcBpoints to the second input sequence
[in]srcBLenlength of the second input sequence
[out]pDstpoints to the location where the output result is written. Length 2 * max(srcALen, srcBLen) - 1.
Returns
none
Scaling and Overflow Behavior
The function is implemented using a 64-bit internal accumulator. Both inputs are in 1.15 format and multiplications yield a 2.30 result. The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format. This approach provides 33 guard bits and there is no risk of overflow. The 34.30 result is then truncated to 34.15 format by discarding the low 15 bits and then saturated to 1.15 format.
Remarks
Refer to arm_correlate_fast_q15() for a faster but less precise version of this function.
Refer to arm_correlate_opt_q15() for a faster implementation of this function using scratch buffers.
void arm_correlate_q31 ( const q31_t pSrcA,
uint32_t  srcALen,
const q31_t pSrcB,
uint32_t  srcBLen,
q31_t pDst 
)
Parameters
[in]pSrcApoints to the first input sequence
[in]srcALenlength of the first input sequence
[in]pSrcBpoints to the second input sequence
[in]srcBLenlength of the second input sequence
[out]pDstpoints to the location where the output result is written. Length 2 * max(srcALen, srcBLen) - 1.
Returns
none
Scaling and Overflow Behavior
The function is implemented using an internal 64-bit accumulator. The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit. There is no saturation on intermediate additions. Thus, if the accumulator overflows it wraps around and distorts the result. The input signals should be scaled down to avoid intermediate overflows. Scale down one of the inputs by 1/min(srcALen, srcBLen)to avoid overflows since a maximum of min(srcALen, srcBLen) number of additions is carried internally. The 2.62 accumulator is right shifted by 31 bits and saturated to 1.31 format to yield the final result.
Remarks
Refer to arm_correlate_fast_q31() for a faster but less precise implementation of this function.
void arm_correlate_q7 ( const q7_t pSrcA,
uint32_t  srcALen,
const q7_t pSrcB,
uint32_t  srcBLen,
q7_t pDst 
)
Parameters
[in]pSrcApoints to the first input sequence
[in]srcALenlength of the first input sequence
[in]pSrcBpoints to the second input sequence
[in]srcBLenlength of the second input sequence
[out]pDstpoints to the location where the output result is written. Length 2 * max(srcALen, srcBLen) - 1.
Returns
none
Scaling and Overflow Behavior
The function is implemented using a 32-bit internal accumulator. Both the inputs are represented in 1.7 format and multiplications yield a 2.14 result. The 2.14 intermediate results are accumulated in a 32-bit accumulator in 18.14 format. This approach provides 17 guard bits and there is no risk of overflow as long as max(srcALen, srcBLen)<131072. The 18.14 result is then truncated to 18.7 format by discarding the low 7 bits and saturated to 1.7 format.
Remarks
Refer to arm_correlate_opt_q7() for a faster implementation of this function.