 |
CMSIS-Driver
Version 2.7.1
Peripheral Interface for Middleware and Application Code
|
|
CMSIS-Driver
Version 2.7.1
Peripheral Interface for Middleware and Application Code
|
Specify execution codes. More...
Macros | |
| #define | ARM_NAND_CODE_SEND_CMD1 (1UL << 17) |
| Send Command 1. More... | |
| #define | ARM_NAND_CODE_SEND_ADDR_COL1 (1UL << 18) |
| Send Column Address 1. More... | |
| #define | ARM_NAND_CODE_SEND_ADDR_COL2 (1UL << 19) |
| Send Column Address 2. More... | |
| #define | ARM_NAND_CODE_SEND_ADDR_ROW1 (1UL << 20) |
| Send Row Address 1. More... | |
| #define | ARM_NAND_CODE_SEND_ADDR_ROW2 (1UL << 21) |
| Send Row Address 2. More... | |
| #define | ARM_NAND_CODE_SEND_ADDR_ROW3 (1UL << 22) |
| Send Row Address 3. More... | |
| #define | ARM_NAND_CODE_INC_ADDR_ROW (1UL << 23) |
| Auto-increment Row Address. More... | |
| #define | ARM_NAND_CODE_WRITE_DATA (1UL << 24) |
| Write Data. More... | |
| #define | ARM_NAND_CODE_SEND_CMD2 (1UL << 25) |
| Send Command 2. More... | |
| #define | ARM_NAND_CODE_WAIT_BUSY (1UL << 26) |
| Wait while R/Bn busy. More... | |
| #define | ARM_NAND_CODE_READ_DATA (1UL << 27) |
| Read Data. More... | |
| #define | ARM_NAND_CODE_SEND_CMD3 (1UL << 28) |
| Send Command 3. More... | |
| #define | ARM_NAND_CODE_READ_STATUS (1UL << 29) |
| Read Status byte and check FAIL bit (bit 0) More... | |
Specify execution codes.
The defines can be used in the function ARM_NAND_ExecuteSequence for the parameter code.
| #define ARM_NAND_CODE_SEND_CMD1 (1UL << 17) |
Send Command 1.
| #define ARM_NAND_CODE_SEND_ADDR_COL1 (1UL << 18) |
Send Column Address 1.
| #define ARM_NAND_CODE_SEND_ADDR_COL2 (1UL << 19) |
Send Column Address 2.
| #define ARM_NAND_CODE_SEND_ADDR_ROW1 (1UL << 20) |
Send Row Address 1.
| #define ARM_NAND_CODE_SEND_ADDR_ROW2 (1UL << 21) |
Send Row Address 2.
| #define ARM_NAND_CODE_SEND_ADDR_ROW3 (1UL << 22) |
Send Row Address 3.
| #define ARM_NAND_CODE_INC_ADDR_ROW (1UL << 23) |
Auto-increment Row Address.
| #define ARM_NAND_CODE_WRITE_DATA (1UL << 24) |
Write Data.
| #define ARM_NAND_CODE_SEND_CMD2 (1UL << 25) |
Send Command 2.
| #define ARM_NAND_CODE_WAIT_BUSY (1UL << 26) |
Wait while R/Bn busy.
| #define ARM_NAND_CODE_READ_DATA (1UL << 27) |
Read Data.
| #define ARM_NAND_CODE_SEND_CMD3 (1UL << 28) |
Send Command 3.
| #define ARM_NAND_CODE_READ_STATUS (1UL << 29) |
Read Status byte and check FAIL bit (bit 0)
